Measure plans with takeoffs and send them to a quote

Takeoffs let you measure a job's plans on screen and turn the totals into a draft quote. They are for the office only. Takeoffs is a beta feature and starts switched off: an owner or admin turns it on in Settings → Features.

  1. Open the job and go to its Takeoffs tab. Choose New takeoff.
  2. Drop your plans onto the takeoff, or click to choose them. They can be PDFs, or JPG, PNG or TIFF photos and scans, up to 25 MB each.
  3. Check each sheet's scale. CREW25 reads it from a PDF's scale note when it can. If it is not certain, the sheet is marked Check scale rather than guessed. You can set the scale yourself by clicking two ends of a known length and entering its real length in millimetres.
  4. Add the items you are measuring and link each to an item or bundle in your price book. Items can be lengths, areas (with cut-outs) or counts. Each can add a waste percentage, and you can group items in folders.
  5. Draw on the plan. Measurements show as you draw.
  6. Choose Send to quote.

This creates a draft quote for the job's customer. It appears on the job's Quotes tab. If you send the takeoff again while the quote is still a draft, it is updated (the button says Update quote).

A job can have several takeoffs, such as the main scope and a variation.

Next, see "Create a quote".

Did this answer your question?

Still stuck?

Email us and tell us what you tried.

support@crew25.com